SRT BH815S Low Profile Brushless CNC alu
SRT BH815S Low Profile Brushless CNC alu
Corally zadní kola, bílý disk  - 28 G
Corally zadní kola, bílý disk - 28 G
Ing. Roman Krejčí
Kolářská 182/2
74764 Velká Polom
Česká republika
IČ: 88751066
DIČ: CZ7212235184
Telefonní spojení
+420 602 82 44 71
Bankovní spojení
FIO banka
RC modely » regulátory

Hobbywing Xerun 100A 2S-3S Stock Spec for 1/10

Hobbywing Xerun 100A 2S-3S Stock Spec for 1/10
Popularita Popularita
Výrobce Hobbywing
Dostupnost Na objednávku
Záruka 24 měs.
Kód položky HW30112400
Cena bez DPH 3 139,67 CZK
DPH 21 %
Cena s DPH 3 799,00 CZK
  • Podrobný popis
  • Diskusní fórum (0)
All the products in this series are sensored brushless power systems for professional races range from 1/10th scale to 1/8th scale, from Modified to Stock. Their excellent performance, reliable structure design and others definitely can meet top-level races# strict requirements against products# performance and quality.

Light weight heat-sink a:nd cases are most suitable for STOCK class race.
All in One. Up to ten profiles can be stored in the memory and imported or exported easily. Factory pre-set profiles include:
Blinky mode, Modify Mode, Stock mode, Practice mode, Offroad mode, Drift mode, Crawler mode.
Built-in Electronic Switch, long life and high reliability, also saves space on the chassis.
External Programming Port (EPP), easy to connect and also a power port for additional fan.
Advanced Dynamic Timing technology, providing more customization possibilities for highest level competitions.
Precise throttle and brake control, setting of drag brake and brake strength with more options, new punch and brake rate control functions, and throttle and brake curves through the PC client.
Integrated Data logger, recording the maximum temperature of ESC and motor as well as the maximum RPM, using LCD Programming box to check easily in the pits.
Multi Protection Functions, making your running safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
Easily programmed with the MultifunctionLCD Program Box and USB Link Software
(Note: XERUN V3 ESC ONLY works with the new version of the USB Link Software, V3.2_121204 or later version is recommended)
New USB LINK Software graphic interface, providing extra parameters for advanced settings.
ESC firmware can be updated through the USB adapter in the LCD Program Box.

Specification XERUN-STOCK SPEC V3.1
Current Continuous: 100A, Burst: 600A
Input *: 4-9 cells NiMH/NiCd or 2-3S LiPo
Built-in BEC: 6V@3A (linear mode)
Resistance: 0.0003 Ohm
Motor Supported: Sensored and sensorless brushless motor
Suitable Motor: ?With 2 Lipo or 4-6 NiMH: 1/10 on-road: >=4.5T, 1/10 off-road: >=5.5T
With 3 Lipo or 7-9 NiMH: 1/10 on-road: >=6.5T, 1/10 off-road: >=8.5T

Suitable Car: 1/10,1/12 all competitions 1/10,1/8 rock crawler
Cooling Fan: 5V
Size (LxWxH): 37.5 x 31 x 32mm
Weight: 86.8g (Includes cooling fan)

* Note:
For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.
For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan need be changed to 12V high voltage fan.